Pressure Sensors ceramic CPS 1184 Z陶瓷压力传感器
Pressure Sensors ceramic CPS 1184 Z陶瓷压力传感器具有 优异的长期稳定性、针对广泛介质的高阻抗的特点。
Features 特点
- excellent long-term stability 优异的长期稳定性
- high resistance against a wide range of media 针对广泛介质的高阻抗
Applications 应用
- pneumatic 气胎
- hydraulic 液压
- electronic pressure switches 电子压力开关
- electronic pressure transmitters 电子压力转换器
Features 特点
- excellent long-term stability 优异的长期稳定性
- high resistance against a wide range of media 针对广泛介质的高阻抗
Applications 应用
- pneumatic 气胎
- hydraulic 液压
- electronic pressure switches 电子压力开关
- electronic pressure transmitters 电子压力转换器
参数说明书下载链接：/filedownload/CPS 1184 Z
| Technical specifications技术规格 | |
| Supply voltage (stabilised)供电电压（稳定） | 5 V (± 0.5 VDC) |
| Power consumption功耗 | < 10 mA typ. Rload > 2 k) < 50 mA max. |
| Output signal (ratiometric)输出信号（比例） | 0.5...4.5 V ratiometric |
| Kalibrierfehler精度 | ± 1 % / FS |
| Therm. offset shift 热偏移量 | 0 ± 0.05 % FS/K (0 ... 80 °C not compensated) |
| Therm. span shift热分辨率 | 0...−0.012 % FS/K (20...80 °C) 0...−0.018 % FS/K (−40...125 °C) |
| Sample rate采样速率 | 1 kHz typ. / 0.5 kHz min. |
| Insulating resistor绝缘电阻 | 1Gohm @ 500 VDC, RT, 70 % rH (clamping 16.00mm) |
| Insulating voltage绝缘电压 | > 0.5 kVDC with minimal membrane thickness, from medium to printed circuit |
| Body material主体材质 | Ceramic Al₂ O3³ 96 % |
| Operating temperature工作温度 | −40 ... +125 °C |
| Storage temperature贮存温度 | −20 ... +125 °C |
| Mechanical and electrical characteristics are customisable. Specifications are subject to change without notice. We recommend that customers perform their own tests for new or untested applications. | |
| PRESSURE RANGE (BAR)压力值 | LONG THERM STABILITY * 长期热稳定性 | LINEARITY /HYSTERESIS (TYP./MAX.) (% FS) **线性度/回差 | Burst pressure 破裂压力 | OVER-PRESSURE (BAR) *** 极限压力值 | VACUUM CAPABILITY (BAR)真空特性 |
| 2 (1.6...2.5) | ± 0.25 | ± 0.15/0.4 | ≥5 | ≤ 3 | −0.6 |
| 5 (4...6) | ± 0.25 | ± 0.15/0.4 | ≥15 | ≤ 7.5 | −0.8 |
| 10 | ± 0.15 | ± 0.15/0.4 | ≥30 | ≤ 15 | −1 |
| 20 (16...25) | ± 0.15 | ± 0.15/0.4 | ≥60 | ≤ 30 | −1 |
| 50 (40...60) | ± 0.15 | ± 0.15/0.4 | ≥150 | ≤ 75 | −1 |
| 100 | ± 0.2 | ± 0.2/0.5 | ≥250 | ≤ 150 | −1 |
| 200 (160...250) | ± 0.2 | ± 0.2/0.5 | ≥450 | ≤ 300 | −1 |
| 400 | ± 0.25 | ± 0.3/0.6 | ≥700 | ≤ 550 | −1 |
| 600 | ± 0.25 | ± 0.3/0.6 | ≥900 | ≤ 720 | −1 |
| * 1000 hours @ 125 °C | 50 million pressure cycles @ 25 °C, 10 – 90 % FS @ 2.5 Hz | 50 thermal cycles +125 °C/−40 °C, 2 K/min. ** For indipendent linearity 10 points are measured and compared to an ideal straight line. | For all measurements, DUT’s are mounted in Metallux standard Housing according to "mounting proposal CPS 1184". ***Over-Pressure indicates the maximum (short time < 1 s) operating pressure within no irreversible damage to the printed circuit are expected. |
|||||
| Sample Order 订货样本 | ||
| Type型号 | Pressure range in bar压力值 | Electrical connection (acc. to drawing)电气连接 |
| CPS 1184 Z | 100 bar | Solder pads |
| Other dimensions and electrical specifications on request. | ||
