大连汇德电气技术有限公司

FEED (Dalian) Electric Technology Co., Ltd

网站首页    压力传感器系列    Stainless Steel Pressure Sensor SPS 3003 Z 不锈钢压力转换器
SPS3003Z

Stainless Steel Pressure Sensor SPS 3003 Z 不锈钢压力转换器

Stainless Steel Pressure Sensor SPS 3003 Z 不锈钢压力转换器具有优良的耐化学腐蚀性、 高爆破压力的特点。
Features  特点
- excellent chemical resistivity   优良的耐化学腐蚀性
- high burst pressure  高爆破压力
Applications  应用
- brake systems  制动系统
- industrial trucks  工业车辆
- hydraulic  液压
- refrigeration engineering  制冷工程
- pressure transmitters   压力转换器
- pressure switches  压力开关

参数说明书下载链接:/filedownload/SPS 3003 Z 

Technical specifications技术规格
Supply voltage 供电电压           5 V ± 0.5 VDC
Power consumption功耗           < 10 mA typ. Rload > 2 k) < 50 mA max.
Output signal输出信号           0.5 ... 4.5 V ratiometric
Calibration error误差           ± 1 % / FS
Therm. offset shift 热偏移量           0 ± 0.08 % FS/K
          (0 ... 80 °C not compensated)
Therm. span shift热分辨率           0...−0.05 % FS/K (20...80 °C)
Sample rate采样速率           1 kHz typ. / 0.5 kHz min. 
Insulating resistor绝缘电阻           >100 MOhm @ 500 VDC, RT, 70 % rH
Body material主体材质           Stainless stee
Operating temperature工作温度           −40 ... +125 °C
Storage temperature贮存温度           −40 ... +125 °C
Mechanical and electrical characteristics are customisable. Specifications are
subject to change without notice. We recommend that customers perform their
own tests for new or untested applications.

 

PRESSURE RANGE (BAR)压力值 LONG THERM STABILITY * LINEARITY /HYSTERESIS (TYP./MAX.) (% FS) **  Burst pressure   破裂压力  OVER-PRESSURE       (BAR) ***           极限压力值     VACUUM CAPABILITY (BAR)
10     ± 0.6 ± 0.25/0.6 10 15 −1
25 ± 0.5 ± 0.25/0.6     10 35 −1
40 ± 0.5 ± 0.25/0.6 10 60 −1
100 ± 0.5 ± 0.2/0.5 10 150 −1
200 ± 0.5 ± 0.2/0.5 10 300 −1
300 ± 0.4 ± 0.2/0.5 10 450 −1
400 ± 0.4 ± 0.2/0.5 10 600 −1
600 ± 0.4 ± 0.3/0.5 10 900 −1
1000 ± 0.4 ± 0.3/0.5 10 1350 −1
* 1000 hours @ 125 °C | 50 million pressure cycles @ 25 °C, 10 – 90 % FS @ 2.5 Hz | 50 thermal cycles +125 °C /−40 °C, 2 K/min. ** For indipendent linearity 10 points are measured and compared to an ideal straight line. | For all measurements, DUT’s are        mounted in Metallux standard Housing according to "mounting proposal SPS 1000".                                                       ***Over-Pressure indicates the maximum (short time < 1 s) operating pressure within no irreversible damage to the printed circuit are expected.

 

Sample Order 订货样本
                            Type                              型号                     Pressure range in bar                  压力值     Electrical connection (acc. to drawing)      电气连接
SPS 3003 Z  100 bar Solder pads
Other dimensions and electrical specifications on request.

因为品质卓越,所以更加信赖

德国METALLUX产品中国一级代理